Starting the repair of the kitchen, the person is faced with the choice: how to cover the surfaces? Walls, ceiling, working area above the kitchen table. Do it as it was, only new materials? Or find fresh solutions?
Before choosing a wall panelFor example, install wall panels for the kitchen instead of old tiles. Choosing this type of coating, you need to know their pros and cons of. It is necessary to know before: the panel can be made of different materials.
Here is a list of varieties of material panels material can be: plastic; wood; metal; stone; glass; decorative rock; Wood and steam panels of different types.
Each of these varieties of panels can be of different models, styles, colors. Can be large and smaller. Some species laminate. In addition to leaf panels, sheer panels are produced.
When installing wall panels for the kitchen NP Apron, you need to make measurements. Measure how many pieces are needed, a certain size and color. It must be remembered that the plastic panels are fire hazardous. They must be installed away from open fire and heat.
If the cooking table is not too close to the stove, then you can decorate the walls with such panels. Metal - rarely installed.
Only in taste addictions. They are good, but roads. Here and glass will do. Only you need to choose the right color scheme.
Wood-panels-not to install close to the stove. Even laminated. For security. Here PVC panels for the kitchen can be installed next to the stove in the working area. Since this is a special type of plastic that can withstand heating.
To certain limits. These panels, with bright coloring or plain, installed in the form of a apron above the table, good protection. When working with vegetables and other products. The stained wall is easy to wash. Glossy surface of the material allows you to do this. They look elegant.
When you choose panels for walls, you need to navigate select the best wall panels for a certain area of the walls. Different sections, places in the kitchen require a special approach to design.
Such panels sometimes take the kitchens of cafes, restaurants. In residential apartments - this is an amateur. Each area of application of panels on the walls has its own characteristics. Panels that are not suitable and uncomfortable in one place are good in another.
The design of the kitchen depends on the correct taste when choosing panels. We must weigh all the consequences of choosing certain panels well. Since it is unreasonable to cover the kitchen with only panels, you need to think about what else will be on the walls. You can make pieces with bright wallpaper.
And near the sink - panels with drawings or patterns. So that the soap dish and hygiene products on the shelf fit into the harmony of kitchen utensils. On the wall nearby - ladys, tacks, sieve are hanging. They will not stain the wall. Because there are plastic light green panels with patterns.
The design of the kitchen is determined by the addictions of the owner of the apartment. If desired, when a person thinks well, he combines the color scheme and the accuracy of choosing materials to certain places.
Thus, showing instructions and aesthetic sophistication - a masterpiece is obtained in the design of the kitchen. It's nice to look at him, invite friends, friends. Especially if correctly selected wall panels for a kitchen from MDF.
This is a material that is well imitated to the color of the tree. He washes well. It differs with strength. Not afraid of moisture, ultraviolet radiation. Of course there are other colors of these panels. It is necessary to select - by virtue of necessity.
The bought panels must be fixed. You need to know how to fix the wall panel. To make it strong and safe. It is best to fasten on a crate. This is done so. Wooden rails or metal are taken. Concrete will be drilled in the right places. Reiki is attached to the wall.
Using screws - strengthened in concrete. Since the tree can rot, smart people came up with a wooden crate with insulating materials used to isolate the dacha foundations during construction.
Then the crate is sitting tightly on the wall, and the panels are easy to fix to the frame. Not fearing a wooden base. If there is a solution to make a metal grill, then the steel is better. High -quality frame is provided. But there is a simpler way to fasten.
This is attached to the panel wall at once. Prepare the mount. And stick the panels immediately to the wall. You can also glue it. For this, concrete is prepared, primed several times. Then you can apply modern sealants. Click the panel. Squeeze to dry. But still it will be better to fix it with a doom.
