Combining wallpaper of two colors: photos of beautiful combinations in the interior

If you are tired of the same type of design - it's time to experiment. The combination of wallpaper of two colors in the interior burst into the set of designers not so long ago, but now it is the best way to zoning, diluting and accentuating. The tool is useful, but you need to use it wisely. Therefore, to find out how to combine wallpaper with each other - read in our article!

Rules and guidelines

Let's start with simple combination rules. There are only 5 of them:

Tones. Do not tackle too dark tones in a small room. Yes, gothic gray is stylish but not comfortable. The shade will press, compress the room and it will just be uncomfortable to rest in it. There is no such thing with large rooms, you can even take a black one there.

Volumetric drawing. It is also better to leave it for spacious rooms.

Orientation to the side of the world. The northern rooms suffer from a lack of lighting, so at the time of the pastel and vice versa.

Guides. If the room is tall (from 2.75), do not take a vertical drawing. He will make her taller and she will look like a wagon. They are much more profitable than low rooms. Horizontal lines are awkward in long and narrow rooms.

Combination methods

Combining wallpaper in a room cannot be thoughtless. Designers have long developed 8 ways that are simple and convenient.

Combination with vertical stripes

Verticals help to make the room taller, which is why they are often used with multi-level plasterboard ceilings. The width of the stripes and their color do not matter - this is already a matter of taste. But the choice of canvases should be accurate. It is better to follow 2 rules here:

Rolls must be the same length. It will be ugly if part of the room is made with 53 centimeter stripes, and the other one meter.

It is better to take rolls from one manufacturer and even a collection. Although the wallpaper is made of paper, it has an acrylic or vinyl finish. Combined wallpaper in this case will not look very neat, even if there is a difference of only 1 millimeter between them.

Combination horizontally

How to combine wallpaper in a room if the drawing is horizontal? Remember that this direction makes the room visually lower, therefore - only high ceilings.

Combine them too using a horizontal guide. Most often, the wall is divided into two parts. The lower one is covered with wall panels, plaster or wallpaper with a darker tone.

The combination of wallpaper in two colors can be sandwiched with a border or molding.

Accent wall

In the interior, the accent is half of the design. They need to be placed correctly so that each square meter is not accent.

Highlighting with wallpaper is a convenient move, since they help to really allocate a place for rest or work, without building false walls.

How to make an accent beautifully? The main part is glued with ordinary plain canvases - everything is simple here. An accent area is either a highlighted area (bed, sofa, desk, TV), or an area that immediately falls on the eye when entering the room.

Plain and solid

Combining wallpaper of two colors without a pattern is another solution for fragmentation. As a rule, they just take different shades, for example, gray. The wall at the head of the bed is pasted over with a dark gray canvas (because it stands out more), the rest of the room is in a different color.

Pattern or ornament and monochromatic

A combination of this type of wallpaper is the most common. But there is a pitfall here: the background color. You cannot take two rolls with a red base and a pattern, and yellow ones without a pattern. If an accent is not planned, it will start to ripple in the eyes.

But, in large stores they often sell kits. One roll with a pattern, and the second with the same background, but without a pattern.

Pattern + pattern

How to combine wallpaper in a room if both rolls have a pattern? Quite simple and even beautiful. You just need to observe:

One motive. If 1 canvas with a drawing of birds, 2 should not be with fighters or cars. Leaves and twigs are suitable for birds!

Background color. It is better if the color is the same, but in different tones.

With photo wallpaper

In fact, this is an accent, but with one "but". Wall murals are much more flexible in terms of combination. You can only combine them with monochromatic ones, otherwise you will get a mess of images. The tone should correspond to the main palette of the photo wallpaper.

Highlighting niches

Niches are often made in apartments or they are still present from the developer. Do not decorate them with the same canvases as the whole room - it will turn out boring. But a different shade or even a drawing is an interesting move.

Combining wallpaper with different textures

Perhaps the hardest combination. You need to choose a texture so that there is a conflict of a more passive and aggressive relief. Moreover, the second is always in the minority. Mat with gloss looks good, but only if the shiny part will capture the sun from the window.

How to combine wallpaper by color?

How to match wallpaper based on color? If you are not a designer, it is not necessary to know RAL catalogs. It is easier to use a simple color wheel, which is sufficient for these purposes.

Monochromatic combination

Monochrome combination of wallpaper of two colors is the simplest. To do this, take a circle and see which shade you like best. Let's say red. Now you need to choose any of its shades. It doesn't matter, one can be glossy and aggressive, and the other pastel.

The definite complexity of the monochromatic tandem is exactly. In the store, you need to find wallpaper with a specific tonal position, but it does not always work out. In this case, glass wallpaper for painting is better. For paint, you can order computer tinting with subtone accuracy.

Complementary combination

How to combine wallpaper in a complementary pattern? It is built on the opposition of shades. If you look at the circle, then each tone has an antagonist. That's exactly what he needs there. For example, we take red. Its natural antagonist is green. And all their shades are opposite to green.

This combination is universal, but most often used in children. This way you can get bold and fun shades without turning everything into mush.

Similar

Simple technology of combining wallpaper of two colors. You need to choose any tone you like on the circle and capture 2-5 neighbors. An analogy will turn out that also looks very good.

The combination of individual colors (table)

Combination errors

Different wallpapers in one room is beautiful, but very difficult. Among the most common mistakes are:

Lack of a clear plan. Often people buy several rolls and glue the way it is glued. You should not rely on "maybe" and it is better to draw (at least with a pencil on paper) an approximate plan of action.

Choosing the wrong wall. This occurs when a random wall is taken to be pasted over with a different color or pattern. The decision is stupid, since it makes no sense to focus on the wall with the door.

Sloppy placement. Secondary wallpaper is always a small area of ​​the room. They should be located only on one wall, if they do not cover half of the room.

Combination with other finishing materials

Wallpaper is a universal tool and can be combined not only with itself. The design contains:

Wallpaper and brick. A great way to make a good home decoration is to combine single-color canvases with bricks. In this case, he will be the accent. But you should not take canvases with a picture.

Decorative rock. If the repair is "cosmetic" and even the old rough finish is not completely removed, an ordinary decorative stone will do.

Tile. Great for kitchen or bathroom. In addition, tiles can be made to look like marble, metal, wood.

How to make a transition when combining

How to beautifully make a connection between wallpaper of two colors? Do not forget that wallpapers very often like to peel off and after that they will have to be re-glued. All there are 3 ways.

No transition

Cheap and easy way. You can resort to it, both when combining canvas and canvas, and with other finishing materials. But this method has significant disadvantages:

The wall must be perfectly flat. If the repair is in a budget format, then alignment by beacons was not used there. Wall cavities, if they fall on the junction of two materials, immediately catch the eye. And this is not very beautiful.

The joint should be perfect, as in the photo. It is difficult to do this without many years of experience. Even cutting with a knife can misfire and result in a crooked line.

Working without transition requires experience and skills. In this case, it is better to hire a team. But the combination of wallpaper in the joint looks very impressive.

Moldings

The molding is made of foam, so it is cheap and easy to work with. It is glued on the border and covers all finishing defects. It happens both ordinary, even and without patterns, and curly. It has disadvantages, but insignificant:

We will get 2 parallel lines, which means they must be even. Even a centimeter deviation at a length of 2.5 meters will be noticeable. Better to use a laser axis builder than a level.

Styrofoam is very fragile. Hitting it will cause flaking and cracking. And those moldings that are made of wood or plastic are much more expensive.

At the same time, working with molding is simple and anyone can handle it.

Border

The easiest method to hide seams. For this, a long and thin paper tape is used. It's easy to buy and it comes with almost all wallpaper collections. Used to combine wallpaper in corridors and nursery.