If you work slowly, sequentially, you can collect a closet without much stress in a short time. It is important that all components for cabinets in the presence. Therefore, when buying, you need to make sure the integrity of the declared set.
If over time the installed details of the accessories fail, they can be replaced. In every city you can find specialized stores. There you can buy furniture fittings. Usually guide doors and sling of the drawers fail.
If you use the cabinet. It is necessary to change accessories. And observe the rules of use. Do not put linen in the boxes in excess of measure. And the cabinet will serve as a quality and reliable.
Any furniture purchased in the store is accompanied by the necessary details for assembly. The same goes for buying a cabinet. The component included in the furniture set - furniture accessories for the cabinet - you need to check for the presence of a set of all parts. The kit may be included: screws; bolts; locks; veneers; corners for connection; guides for boxes and doors; doors; end keys for bolts.
The suspension cabinet must have angular devices for fastening the cabinet on the wall. At the floor cabinet - the whole set of the necessary accessories. Usually it includes it with a margin for several details.
Which kit is given to the cabinet - depends on the type of cabinet, its device. Where necessary, bolts are used. If necessary, wooden veneers are clogged. Each disassembled cabinet from the store is given the assembly scheme.
Carefully reading the instructions and observing the assembly scheme, you can independently assemble the cabinet on the spot in the apartment. If the cabinet is unfamiliar, which person never collected, you must carefully delve into the circuit. Not rush when assembling.
Otherwise you can ruin the accessories that in a limited amount. In addition, you can lose time when assembling. It’s better not to rush. It is necessary to do thoroughly. This is the right path to success. You also need to have good assembly tools at hand.
It is necessary that the accessories for the wardrobes lie in sight, so that it is convenient to work. Although the cabinets are of different models and types, the assembly principle is not very different in the main. There are differences in the privileges regarding work with a specific model.
The basic assembly principle is not difficult to remember. It must be performed carefully and preferably skillfully. The side walls of the cabinet, top and bottom are assembled. With the help of accessories and bolts, everything is fixed. When assembling, first do not tighten the bolts until the end.
To have a small backlash. As the back of the cabinet, the back wall from the second -rate material on the nails will break through - you can fix the bolts in the corners thoroughly. The cabinet will not bother anywhere. Will stand even.
The box of the cabinet is collected. No need to rush to hang doors. First you need to see: what else can be inserted inside for the cabinet fortress. In any cabinets, in the compartment, too, there is a special stick - a spacer strengthened inside the cabinet. Punches with costumes and dresses then cling to her then.
The spacer must be strengthened immediately as soon as the box of the cabinet is assembled. District is also part of the accessories, like other details necessary for strengthening inside.
Monitor the quality of work. Since an unevenly installed spacer is a marriage during assembly. Install all shelves. Когда выполнена вся эта основная работа по сборке – шкаф крепко стоит, не шатается.
Different models have different ways to design door strengthening. Some need guides for doors. Which must be strengthened in advance on the cabinet before putting the doors. Such wardrobes have sliding doors.
It is better to fix the guides in this way. Set the place with a marker. There will be screws there. Then a little drill a little drill in these places. And fix the guides to the screws.
To make it sure for sure, you must first fix the forward, middle, the end of the guides. Then the rest. Typically, two sliding doors have two guides, to the right and to the left of the cabinets.
If the doors are hung, accessories are already used by another. Special furniture loops. They are also an unusual look. Which is given to this cabinet, this is also attached. According to the drawing, according to the scheme, this is planned, and not something else. It is better not to invent anything superfluous here, to follow the scheme.
Loops are fixed. Then the doors themselves are hung. In different designs, the scheme may differ. But everyone has one principle. Doors must move freely in both directions, reliably protected from falling out from the intended sliding limits.
Still on the doors unspecified on the cabinet, you need to fix the handles for the cabinet in advance. It’s easier to hang the doors to the cabinet with this element. After all, when installing the lock, you have to open the door and close the door. Check. Without a handle on the door, fasten the lock is inconvenient.
During installation of door locks, you need to clearly follow the instructions. The fact is that the design is made in such a way that this is the only way to correctly install the castle.
Accessories for the cabinet doors are subordinate to this constructive plan. Following the instructions, you can quickly install the lock.
After the handle on the door - the lock is installed. The kit is usually not only door handles. Also pens for collected boxes, guides to which must also be installed. Handles for boxes, as a rule, of the same type. They can be with patterns and artificial gilding.