The variety of textures, textures, colors, in a wide price range currently does not interfere with budget repair and reconstruction of the floor using elite materials. Previously, you can choose options for models by photo tiles in the hallway, which post online stores of finishing materials.
Paul tiles in the corridorIn the hallway, the floor is regularly subjected to frequent washing, the action of reagents brought on shoes, and some shoe models can cause damage to the soft coating. Therefore, floor tiles in the hallway are the most practical and at the same time aesthetic coating option.
note! Our partners, digging LLC Stroytekhmontazh are always in the presence of plywood in Moscow - the lowest prices and the highest quality!
Many people think about the flooring in the hallway, and if linoleum is less and less than the choice of choice, then the competition is laminated. From a practical point of view, not a single laminate is compared in terms of its characteristics in terms of stability, with ceramic tiles.
Tiles in the interior of the hallway creates a sensation ...expensive... repair, while the service life of such a coating is many times higher than options with other materials. For many years, the floor in the hallway of tiles looks ...like New....
In spite of ...cold... material, the floor can be added to the overall interior of a touch of heat and comfort, or on the contrary, emphasize official strictness. The floor of the tile in the hallway can be viewed in the catalog of the work performed.
In living space, hallways, as a rule, try to make a cozy. If the area is significant, then the plain floor will look ...state -owned.... The combination of textures and colors allows you to create visual comfort, and additional equipment ...warm floor... will make the corridor really warm.
If the overall interior requires monotony or for other reasons the combined tile does not fit into the hallway, you can cover the floor with imitation of wood from ceramics. Today there is a wide line of different sizes and color solutions of tiles under a tree. It looks quite spectacular ...Black... wood or its opposite - white tiles with a texture under a tree.
The tile must be selected primarily with taking into account the proposed load. The higher the cross -country ability, the more durable the coating should be, including its upper layer - painting tiles.
The favorite in resistance to various kinds of influences is porcelain. Such material withstands the effect of moisture and is not susceptible to abrasion of color, since the kner is not superficial, but in the entire structure of such tiles.
Another property that will be a significant advantage of decorative tiles in the hallway is a high level of anti-slip. This indicator for the hallway should be close to R10-R11
Tile texture has not only a decorative value. If the texture surface has many roughnesses, then such elements will contribute to the accumulation of dirt in them. Therefore, closer to the front door it is better to choose a tile with a smooth surface, but take into account the level of anti -slip.
One of the most practical options is dark porcelain tiles on which pollution will not be too noticeable. If the interior provides a light floor, you can use a combination of tiles in the hallway and make the most cross -country ability to make dark, and the rest is finished with the material of lighter tones.
The color of the grout should also be selected from a practical point of view. The light grout will also get dirty and it is more difficult to wash it even with the help of special chemicals.
The technology of laying tiles on the floor primarily requires certain tools for laying. For floor tiles, special glue is used in which there are polymer additives, and the basis is a sandy - cement mixture.
The consumption of such glue is about 7 kilograms for 1m2. One bag, weighing 25 kilograms, is enough for laying 3.5 m2, subject to a layer thickness of 1 cm. The surface is pre -prepared for better adhesion. For this, the surface is impregnated with a special composition at the rate of 0.3 liters per 1m2.
Tiles can be laid in two ways: traditional and diagonal. With any laying method, the uniformity of the gap between the seams is regulated using special crosses. The number of these crosses depends on the size of the laid tile (on the number of elements in 1m2).
Initially, you need to make sure that the surface is flat. Otherwise, it must be leveled. The surface is aligned with a sand and cement mixture along the displayed beacons.Only after completely dry, after 10-14 days you can start installing the coating.
The surface is cleaned of garbage and impregnated with a primer. It is convenient to use a water roller when impregnating.With open space, they usually begin laying from the middle. Marking with chalk is made and the process begins to focus on it.
Diluted mixture for laying tiles should be infused within 10-15 minutes. The glue is applied with a gear spatula to the floor and the tile is pressed to the solution. For a tight shrinkage. The surface of the tile is rebuilt with a rubber clay. The horizontality of each element is checked by the level.
You can adjust the position of the tiles on the gap within 15 minutes, then, the glue will begin to grasp. After laying the subsequent element, a cross is installed in the gap. After laying all the tiles, the seams are overwhelmed.
Grout is made by rubber spatula.It is important not to confuse the grout for walls and floor.The quality of styling depends on compliance with the technology of the entire process, starting on the preparation of the surface and completing the excretion of the horizon of the entire gender.
