If for decoration of rooms you can use wallpaper, paints, etc., then for decorating the walls of the kitchen and bathroom tiles it is difficult to find a replacement.
It is more practical than other finishing materials.
In view of the special microclimate of these premises, it is often necessary to clean and usually with the use of detergents. Tiles in these conditions successfully pass the strength test.
A variety of assortment, size and color palette is so great that you will always find an option to your liking and will not regret the limited choice.
This explains its popularity for many years in people with different levels. After all, here everything will depend on the design solution and the quality of ceramics. Photos of wall decoration tiles.
Types of modern ceramicotechics execution of a hollow finish -wing decoration of wall decoration with tilesTypes of modern ceramics
What types of tiles I offer modern manufacturers: Single firing. The glaze is applied to the pressed mixture before firing. Double firing. The pressed base is covered with icing after the primary firing and then the repeated Porcelain. This unusual product is obtained by firing pressed special ingredients. The need to glaze and re -firing disappears. Clinker. The unique type of this ceramics is created when processing clinker clay with high temperatures. Porous. Formed due to shrinkage of the basis during firing.
Porcelain and clinker tiles are the most reliable and strong. Create a moisture resistant and resistant to processing with detergents and chemical preparations, you can when decorating walls with this tile.
The option with porous ceramics will also be good. Low -porous tiles are more standing to wiping and still has good frost -resistant characteristics.
The service life and operational characteristics of other types of these products will not disappoint you either.
Technique of execution
The design of the walls with tiles only then pleases the eye when the technological process of laying this finishing material is not violated. Wall decoration for tiles includes the following stages:
The walls are aligned, chips and cracks are sealed, cleaned from the remains of old wallpaper, paints, dust;
Sorting and numbering the tiles in the order in which it will be laid.
An adhesive solution is prepared, with which ceramics will be attached to the wall. For this they use ready -made dry mixtures. They are previously bred in water in such quantities that there is enough work for 20 minutes. They do not cook a lot of mixtures at once, as it freezes quickly.
Next, laying is done. The place of the first element (the corner of the room or the interior item) is determined). Then from glued tiles, which is aligned vertically and horizontal, a row is laid out.
Metal stripes are used for more accurate laying. The gap between the tiles is installed using plastic crosses of different widths.
After the end of the work, the crosses are extracted, and the seams are wiped with a solution. This work is done no earlier than 2-3 hours.
The advantages and disadvantages of the OSB plateStaircase in the interiorFacade stone finishing is the best that you can chooseInterior decoration
There are also many tiles of wall decoration as its types.
The original design solution will be clinker tiles for interior wall decoration. Elegant and practical brickwork will decorate the interior of any room.
The correct selection of color scheme will help to avoid excessive gloom.
There are several more options for facing walls inside the house:
Faience. Nowadays, it is practically not used due to the limited choice of color and texture.
Electricity in a private house3 types of floor slabsWhat the cost of a plastic window depends on?Monocottura. Single firing tiles. Due to the low cost are still popular.
Majolica. Two -level firing is provided. Has a porous structure, so it is forbidden to use it in bathrooms.
Cotto. Refers to the type of porous tiles. It is used in interiors in antiquity lovers.
Wall tiles. It will look equally good both in the traditional interior and modern style. The lining selected with taste will revive it and give expressiveness.
The use of white and black colors will bring warmth and comfort into a strict style.
Features of the use of molar tapeFurniture setsGeotextile for terraceExternal finish
To decorate the outer walls with tiles, the facade tiles are used. There are several of its varieties:
Kabankik. Facing in the form of a brick with a chamfer, so that the surface looks very natural.
Clinker tiles. Modern type of decoration for brickwork. The disadvantages include the high cost.
Plastic tiles. Rather, even a finishing panel made for tiles. It is made of polyvinyl chloride. It has the appearance of brickwork or natural stone.
Crama border tiles. Strong and reliable. It is used not only for external cladding, but also for decoration of walls and floor tiles indoors.