A cabinet that has a body, partially or completely, performs the walls, floor and ceiling, is called built -in.
The main advantage of such a cabinet is the maximum use of useful space. The hallway usually does not differ in large sizes, and every centimeter has to be saved. The lack of gaps between the walls and the ceiling, where dust could accumulate, another positive property.
A variety of photos of built -in cabinets in the hallway, you can find on numerous thematic sites.
Materials for manufacturing
Wood, chipboard and MDF panels - the main components of products. Glass and metal are still used for the manufacture of doors.
Varieties
By design, two types can be distinguished.
In the first case, the cabinet is built into a ready -made niche or into a corner. In the second, with the help of the side rack, the necessary, part of the space for it.
Subspecies
According to the door opening system, cabinets can be: Compartment; Sash; Combined (coupe+sash).
The third subspecies has a huge number of combinations.
Filling
The ideas of built -in cabinets in the hallway are numerous, and by filling them can be adapted to any needs. But, since in the hallway, its main function is the storage of outerwear and shoes, we will consider options for these purposes.
Methods of suspension of clothing depend on the depth of the cabinet. If the depth is less than 50 cm, then the product is supplied with hooks or perpendicular, drawn -out rod. In the case of a rod, the width compartment should not be less than 55 cm. For a depth of 0.5 m, it will be more rational to use the longitudinal bar under the shoulders.
If you are going to store all outer clothing in the hallway, then it makes sense to equip the cabinet with rods in 2 levels, for a larger capacity. There is a large assortment of dropping crossbars (pantographs). They are suitable only for deep cabinets, from 60 cm.
There are many devices for storing shoes. It can be ordinary shelves, metal nets, leaning mechanisms, etc. The latter are intended mainly for depths of less than 30 cm. The advantage of nets in the inappropriateness of deoxidation and good ventilation.
An integral component of the wardrobe is a shelf for hats. It is located at a height of 1.8-1.9 m from the floor. Its depth should be at least 25 cm.
The presence of drawers is necessary for folding all sorts of trifles (brushes, cream, keys, etc.).
Even for boxes with shoes not for season and handbags, you need a certain number of shelves.
These are the necessary components of full functionality.
Appearance
The design of built -in cabinets in the hallway is able to satisfy requests for every taste. A wide variety of colors and shades of materials make it possible to give the product harmony with the interior of the hallway.
For the compartment, the ideal solution will be the doors from the floor to the ceiling, to which their guides (tracks) are attached. When shifting which, access to shelves and compartments over the entire height immediately opens. If the room is not large, then the mirror doors will visually expand the space.
The advantage of the sliding system is compactness. For opening, no additional space is required.
Built -in corner cabinets in the hallway are very functional with this system.
Mirrors and glass are used both by a whole blade and in combination with inserts from chipboard and MDF. Glass can also be tinted, matte, with sandblasting, with photo printing and different colors.
Features of structures
In order to avoid sagging shelves, their width should not exceed 80 cm. For this, it is necessary to install intermediate partitions.
Cam doors less than 60 cm wide are not stable, and when opened, they are tidied diagonally. For swinging, the width of more than 60 cm is not desirable. This causes sagging, and they will cling.
If you decide to order a corner, built -in wardrobe in the hallway, then during installation, pay attention to that the doors do not interfere with the full rolling of boxes. Also check the availability of all shelves.
The cabinet can be made independently. To do this, it is necessary to measure the opening, determine the design, make a detail.
Most stores, in the trade of chipboard and MDF, offer services for their sawing and gluing the edges. It is necessary to give them the sizes of the parts and indicate the parties for the assignment. Having taken the finished elements, it remains only to mount them.
But, it is better to trust professionals. The designer will produce the correct measurement, develop a design taking into account your wishes and calculate the cost using different components. Will provide samples of materials. Will give exhaustive answers to questions of interest. Experienced experts will mount and adjust the mechanisms qualitatively.
Photos of built -in cabinets in the hallway
