If you have melted a socket, the machine gun was burned out in the shield, the rosette fork is constantly overheating and t. D. The reason for all this may be the quality of the contact between the conductor and the device. In order to prevent such a problem, use copper tips, they prepare the end of the conductor to combine and fix the cores and wires in the clamps of a screw or spring type.
There are two types of tips:
With a control hole. They are used in responsible electrical connections when it is necessary to control the cable completely penetrated inside, to ensure reliable, technically correct and durable assessment.
Without a control hole. Used for isolated or not compacted copper conductors.
In the manufacture of tips, a tinned electrical copper is used, which is most protected from oxidation and corrosion. In factories, in order to get such copper, copper sheets, pipes are subjected to electrolytic pins. During this operation, they acquire an uniform anti -corrosion coating of tin and are able not to oxidize under the influence of air, moisture and other aggressive and unfavorable media. In comparison with uncovered, tinned parts have high chemical resistance to solutions of sulfuric, hydrochloric and nitric acids.
Today, manufacturers produce two types of tips, which are divided according to the fixation method:
one. Copper -puddled tip for soldering. Soldering is carried out using a tiger with molten tin or solder.
2. Copper Luguski tips for crimping. This is the most effective operation that is carried out without electricity and complex equipment. To do this, you need to exactly choose the tip and squeeze it with a special tool with ticks. In order to fix the wires qualitatively, you need to make at least two anneal.
If you want to buy copper tips, go to Product-Category/Kabelnaya-Armatura/Nakonechniki-Kabelnye-Silovye/Nakonechniki-Mednye-SC.HTML, where you were presented a large selection of goods at affordable prices from the manufacturer.