Features of projects of private houses from aerated concrete

When designing a house from aerated concrete, all the characteristics of this material should be taken into account. Trust the development of the project of your home to a professional. Then this will help to take into account all the nuances and avoid possible errors.
Currently, the market has many different materials for the manufacture of load -bearing walls and partitions of houses. Every year aerated concrete is becoming more popular. Bubble concrete is a type of bubble concrete. Artificial stone with holes with a diameter of 1 to 3 mm, evenly distributed throughout the volume.

In most cases, projects from aerated concrete are chosen due to material advantages such as economical, warmth and simplicity of the bath.

Advantages of a gas concrete cottage project

Building a house made of bubbly concrete by project is cheaper than from brick or porcelain blocks. Savings are achieved at the expense of several factors: The low cost of the material itself and laying work blocks the need for a solid foundation in the isolation of the high -altitude temperature of the gas concrete has several traditional structures of external walls.

Bubble concrete block 400mm + finish (plaster, siding, artificial stone, etc.D.).
Penobstone block 300 or 400 mm + insulation 100 + finish (plaster, siding, artificial stone, etc.D.).
Penobstone block 300 or 400 mm + air gap 30 mm + front brick 120 mm.
As you can see, aerated concrete is sufficiently warm material. If you build a house from blocks with a thickness of 400 mm, you do not need to insulate the walls additionally. For projects of houses from aerated concrete as an external decoration, it is enough to provide plaster, siding, artificial stone, etc.D.

Simple
Bubble concrete-light material (500-1000 kg/m3). In this regard, in most projects of houses from aerated concrete there is no need to provide a strong foundation. However, nevertheless, a weak foundation should not be inquired out of ignorance. In any case, the project is subject to mandatory calculations and justification.

Construction speed
Due to the large size and high geometric accuracy, the masonry rate of aerated concrete blocks is on average 2.5 times higher than masonry of brick. You have already started the interior decoration while your neighbors are building walls.

Features of a project of a house from aerated concrete

Choosing a project of a house from aerated concrete in Samara, it is important to understand that, like any other material, aerated concrete blocks have their own unique properties. Bubble concrete is not durable. This should be taken into account when designing and building a cottage.The height of a house from aerated concrete is limited to the 3rd floor. But in most cases this is enough for a private house. Most projects are one -story houses from aerated concrete or attic.The masonry should be strengthened in design and construction to prevent cracks in the walls. The strengthening under window openings and each 1st and 4th rows of masonry are subject to strengthening.Bubble concrete does not withstand spot loads. Armopias must complete the installation of the floor in order to evenly distribute the load from the ceiling between the floors. In this case, it should be 50 mm thinner than the thickness of the wall. Place the heater in the formed gap and remove the cold bridge.When designing a house from aerated concrete, all the characteristics of this material should be taken into account. Trust the development of the project of your home to a professional. Then this will help to take into account all the nuances and avoid possible errors. And as soon as the project is ready, we recommend that a contractor who is ready to build your home.